Halaman

Sabtu, 17 November 2012

CARA SETTING MODEM ADSL TP-LINK TELKOM SPEEDY


  • Misalkan settingan Modem TP-Link sudah bisa konek ke Internet menggunakan kabel lan RJ45, sama serti Modem TP-Link standar lainya.
  • Silahkan baca “ CARA SETTING MODEM ADSL TP-LINK TELKOM SPEEDY “
  • Sekarang kita tinggal SETTING Wireless Access Point Modem TP-Link TD-W8951ND
  • Masuk ke WEB Base TP-Link : ketik 192.168.1.1 di browser kemudian enter
Web Base
Insert Username & Password
  • Masukkan “Username” dan “Password” kemudian enter..
  • Pilih Interface Setup kemudian pilih Wireless pilih Actived
Interface Wireless Setup
  • Kemudaina Lanjutkan settingan untuk nama perangkat (SSID), Security WPA-PSK, kemudian WDS Setting.
Security Wireless Setup 
  • Terkhir “ Save ” dan Restart Modem..
Set Up Complete
  • Test koneksi menggunakan Laptop … Setelah SSID terdeteksi ( Contoh disini nama SSID adalah “Warnet Pakai Speedy”, maka akan diminta memasukkan Pre-Shared Key WPA-PSK yaitu 987654321 (sesuaikan dengan settingan anda)

Refresh Network List
Insert Network Key
Wireless Connected
  • Wireless sudah siap digunakan..
  • Rahasiakan WPA-PSK dan WDS Key anda biar tidak disalah gunakan..

Read more: http://warnet-speedy.blogspot.com/2012/09/setting-modem-tp-link-td-w8952nd.html#ixzz293MKdIvf
Under Creative Commons License: Attribution
key
647002CE3DF0
Diposting oleh di Tidak ada komentar:

ADSL Modem SMC


ADSL Modem SMC
  • Default IP: 192.168.2.1
  • Default password: smcadmin
Setting Bridge:
  1. Klik WAN
  2. Klik ATM PVC
  3. Klik VCI
  4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  5. Klik Save Settings
Adsl Modem SMC
Setting PPPoE:
  1. Klik WAN
  2. Klik ATM PVC
  3. Klik VCI
  4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
  5. Klik Save Settings
ADSL Modem ZyXeLP-660R
  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: 1234
Setting Bridge:
  1. Pilih Network
  2. Pilih WAN
  3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
  4. Pilih Maintenance
  5. Pilih Tools
  6. Restart
Setting PPPoE:
  1. Pilih Network
  2. Pilih WAN
  3. Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
  4. Pilih Maintenance
  5. Pilih Tools
  6. Restart
ADSL Modem Shiro
  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: admin
Setting Bridge:
  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router
ADSL Modem Shiro
Setting PPPoE:
  1. Pilih Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router
Adsl Modem Shiro
ADSL Modem Aztech
  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: admin
Setting Bridge:
  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router
Setting PPPoE:
  1. Pilih Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router
Diposting oleh di Tidak ada komentar:
Langganan: Komentar (Atom)